Mercedes GLC Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have just purchased a new GLC 250d amg in the UK and wish to fit a Blackvue 2 camera. I need to find a fuse that is only live when ignition is on. Also since it is a front and rear camera system, I need advice as to how easy it is to remove the trim to get to the rear window. Is there a trick in removing the necessary parts including the rubber between the car and the rear window?
Help please.
 

·
Registered
Joined
·
467 Posts
Hi Mercman2018 and welcome to the forum. Aussie member @ceasar plumbed in a 2-channel Blackvue 750S recently. There's a thread over on MB World with pictures of the appropriate fuse tapping point which can be accessed from under the load floor at the rear.

Ceasar's dashcam installation post.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
How do I remove the panels around rear window

I have managed to get the front cam working, but how do I route the rear camera cable. OK to get it to the back of the car, but threading it through the rubber with so many other wires inside and then how do I get the large panels off without damaging them. Mercedes garage just won't help and local garage says he will do it for £500
 
1 - 3 of 3 Posts
Top